Articles in this section

Setup Nikon WiFi camera for iPhone and iPad

Avatar
Keenai Support
Updated
Follow

Requirements

In order to transfer photos from a Nikon camera to Keenai application for iPhone and iPad, you'll need the following:

Supported Nikon cameras

To see which Nikon cameras can use the WiFi camera support feature to transfer photos via their internal wifi connection directly to the Keenai application for iPhone and iPad please review the article WiFi camera support overview. 

Setup WiFi camera support

To set up the WiFi camera support feature for your Nikon camera, you'll first need to download the Keenai application from the Apple App Store or click the Download button below:

Download

Once you've downloaded and installed the Keenai application, follow these steps to setup WiFi camera support for your Nikon camera:

  1. Make sure you've logged in or created a new Keenai account.
  2. Go to the Wi-Fi settings of your device
  3. Turn off the Wi-Fi for the device
  4. Now take a few test photos.
  5. Tap the Wi-Fi button on the back of the camera.
  6. Turn Wi-Fi back on for the device.
  7. When your camera's network appears
  8. Tap on the network and enter the WPA2 as it appears on the back of the camera.
  9. Once the device is connected to the camera's wifi network go back to the app and your images should now be transferring to the Keenai iOS application.

Next, follow the steps below for your camera or wireless adapter model:

Nikon 5300, D750, D5500, D7200

  1. Press your camera's MENU button
  2. Scroll down to the Wrench icon and select Wi-Fi
  3. Select Enable and press the OK button
  4. At this point, your camera should show the network connection as ON
  5. Select Network settings and press the OK button
  6. Click here to continue on to steps in the Keenai application

Nikon 1 J5

  1. Press the Wi-Fi button on the back of the camera to turn on WiFi and display the Camera Network name
  2. Note the Network SSID; the default network name should begin with Nikon_WU_...
  3. Click here to continue on to steps in the Keenai application

Nikon WU-1a and Nikon WU-1b Wireless Mobile Adapters

  1. Insert the Wireless Adapter into your camera
  2. Turn the camera ON
  3. Press the WPS button on the adapter for about 5 seconds or until the LED flashes red and green
  4. Click here to continue on to steps in the Keenai application

Return to the Keenai application

  1. In the Keenai application, tap Next or the X in the upper-left corner
  2. Select your camera's or wireless adapter's model number from the list of available networks (it can take up to a couple of minutes for your the wi-fi network to appear)

From now on, when you want to transfer photos from your camera to the Keenai application, all you need to do is tap the Wi-Fi button on your camera while your iPad or iPhone is in-range of the camera. Your camera will then transfer photos to the Keenai application

Nikon is a registered trademark, and other Nikon product and service names and slogans referenced in this article are trademarks or registered trademarks of Nikon and/or their affiliated companies.

Comments

0 comments

Article is closed for comments.